www.inkcups.com   About Us   Contact Us

Archive for October, 2016

The Idiosyncrasies of Printing Silicone Products

October 13th, 2016 | Author: Jessica Makrinos
Silicone Ink Article for Inkcups

Inkcups was featured in Specialist Printing Worldwide where our ink expert outlined the ins and outs of printing on silicone

Joe Shairs, the Ink Technician/Compliance Coordinator at Inkcups Now, offers application options and tips- via http://www.specialistprinting.com/

There are plenty of items made of silicone around us. Among the very popular products that companies want to personalise nowadays are cellphone covers and credit card wallets (which people attach to the back of their cellphones), swim caps and wrist-bands for different causes.

There are also medical products made from silicone, such as prosthetics, masks and implants, which may need to be painted or marked. Another application is marking the silicone keypads used in aircraft instrument panels.

DECORATING OPTIONS AND INK TYPES

There are very few ink systems available on the market for silicone decoration. It seems that the only thing that sticks to silicone is … silicone. So all the available ink systems that I’ve seen so far are essentially liquid silicone, designed to be screen- and/or pad printed  and  requiring heat curing.

Most screen- and pad printing companies are accustomed to dealing with solvent-based or UV-curable inks. Silicone-based  inks are very different, and I would like to share some considerations and tips for handling them successfully.

CONSIDERATIONS FOR PAD PRINTING

Unlike solvent-based inks, silicone-based inks always remain wet – that is until they are cured in an oven with high heat. There are several implications that concern pad size, pad cleaning, depth of plate etch and multicolour printing.

PAD SIZE

It’s normal to  have  residual  ink on the  plate after it is doctored . Solvent-based  residual ink will usually dry right away, before the pad could pick it up and transfer to the product. But silicone-based ink will not dry – so you need to select the smallest  possible  pad that  can  pick up your  image  (and  not touch  the  residual ink).

PAD CLEANING

Silicone sticks to silicone, and there is a downside to that; the ink wants to stick to the silicone  printing pad. With solvent-based  ink, you get complete  release of the ink almost all the time. But with silicone  inks, you  need to clean the pad after every four or five prints, otherwise print quality will suffer. You can wipe the pad with a lint-free paper towel/cloth or tape the pad off with sticky packing tape. (Some pad printing machines are equipped with a cleaning station, and you can program the pad to ‘print’ onto the tape and get cleaned, as often as you need. We at lnkcups have pad printer models with  cleaning stations.)

DEPTH OF PLATE ETCH

Silicone inks tend to be more transparent than solvent-based ink. Plus, as mentioned, the silicone pad can’t release all the ink. So the  plate etch needs to be very deep to avoid potential problems with image opacity . The traditional depth of etch for printing onto promotional products is .001 inch. With silicone ink, we  recommend  .0015″  or  even  .002″.

ADVANTAGES OF SCREEN-PRINTING

I like to see our customers screen-print on silicone instead of pad print, for a few reasons. First of all, you lay down more ink so the opacity of the print is never an issue. Second, there  is  no danger  of overprinting  (accidentally  picking up residual ink and depositing it around the image). You have a screen with dots, and whatever comes through the dots, is your  image.

Another big advantage is the option of printing in batches. Similarly to the loading templates that we offer for ink-jet printing, some of our customers have developed templates for screen-printing. They use the templates to put ten to 20 of the same product in the correct spots and print them with one screen at the same time, which dramatically  increases productivity.

SPRAYING

Silicone ink can also be sprayed through an air gun. This is what is done for covering silicone products such as face masks and medical items with skin-tone colors. lnkcups offers special thinning oil to enable this application.

AVOIDING HEAT AND FRICTION WHILE DECORATING

Things to avoid with silicone ink during printing are extra friction and heat. In a hot environment, the ink will get more viscous (thick). Conversely, low temperatures prolong the pot life of silicone ink.

When screen-printing, the squeegee speed may create excessive friction over the screen, and the ink may jelly up in the screen and start to set. This mostly concerns high volume producers that run production at very high speeds. You can’t avoid friction completely, but you should slow the squeegee down. (When pad printing, the ink cup speed does not affect the ink negatively.)

PLATINUM-BASED VS TIN-BASED SILICONE

Silicone can be made on the base of platinum or tin. Silicones with different bases are not compatible, and platinum-based ink will not stick to tin-based product.

Most silicone products that our customers encounter are made with platinum-based silicone (out of hundreds of applications, there have been only two where the product turned out to be made of tin-based silicone). If you are planning to decorate a silicone product, you may need to check product composition with the supplier.

HEAT  CURING TIPS

How much heat and time is needed to cure the product depends on how big the graphic is and how much ink you are laying down. For SI silicone ink that we offer at lnkcups, we recommend starting with six minutes at 124 degrees C (255 degrees F). Some customers will be able to use a little less heat and time – but you will need to test your particular product and image internally. In my experience, wristbands require less heat/time and swim caps, more. If your product is coming out of the oven and the ink is smudging off, it needs more heat and/or time. When cured properly, the ink becomes an integral part of the product.

You want to aim at the lowest heat and shortest time that does the job, not only for productivity reasons but also to avoid exposure to formaldehyde , which would pose health risks. Liquid silicone starts producing formaldehyde when heated to a certain temperature. For our SI inks it is 149 degrees C (300 degrees F). It is crucial that you ask your silicone ink provider what that temperature is for their ink formulation.

MULTICOLOUR PRINTING CONSIDERATIONS

Most people print one-colour images onto silicone. Multicolour jobs become very cumbersome because you have to completely cure one colour in the oven before printing another. If the registration of the second colour needs to be very precise, it adds another layer of challenge, especially with pad printing, where your tooling fixture becomes critical. With screen-printing, I’ve seen customers achieve good registration by using templates.

 SI INK SYSTEM FROM INKCUPS NOW

Our SI is a platinum-based two-component system. It consists of ink and catalyst (hardener). The pot life of SI is much more user-friendly than that of solvent-based inks. Once you add the hardener, you have 24 hours or more to use that ink (solvent-based ink, once mixed, lasts for six to eight hours). To extend pot life even more, some of our customers store the mixed ink in the refrigerator overnight and in this way use the sa me batch for over two days.

SI is a very safe product. It has little to no odour . It passes compliance tests such as CPSIA with flying colours. In addition to numerous variations of promotional products, SI is actively used in medical applications, such as marking breast implants and colouring artificial skin to make it look natural. SI comes in 18 stock colours. We also offer a twelve-colour mixing system with a calculator for colour matching so the customers can create Pantone colours in-house. Technicians like myself are standing by to answer any questions and help you be successful with printing on silicone – or virtually any other substrate for that matter.

 

To download the full article, click here